긴 진홍잉꼬 기업 Co., 주식 회사

1st
가정 > 제품>기계장치를만드는장갑>

GB300 Glove Box (Purification And Regeneration System)

정보를 접촉하십시오
  • 국가/지구: 대만
  • 도시: 새로운 타이페이
  • 컨택 담당자: Mr. Mark
  • Tel: 886-2-22691052
  • 팩시밀리: 886-2-22691057
책갈피 & 몫:

GB300 Glove Box (Purification And Regeneration System)

제품 카테고리 기계장치를만드는장갑
판매 방법 수출,도매,서비스
지불 기간 T/T,보자마자 L/C
최소한도 순서: 1 조각
책갈피 & 몫:

제품 세부 정보

제품의 특성:

  • 대만
  • GB-300
  • long-lory
  • 10/11/2018

추가 정보:

  • ** (cm)

제품 명세서 / 특징

GB300 glove box (purification and regeneration system)
[Glove box body]
(1) Glove box outer dimensions: 3000L X840W X 920Hmm
(2) Glove box body material: stainless steel SUS304, thickness: 3mm, glove box interior polished sand surface, external powder paint treatment
(3) glove box working gas: nitrogen, argon, helium inert gas environment
(4) Storage layer: stainless steel SUS304, thickness: 1.5mm, two (900L X 200Dmm*6 pieces)
(5) Lighting: external fluorescent lamp 30W*2
(6) Glove box window: transparent Lexan window, thickness: 10mm
(7) Glove fixing ring: white Polyformaldehyde material, Size: 220mm diameter, O-ring sealed
(8) Gloves: Butyl material, thickness 0.4mm, glove weight: 3 pairs
(9) Glove box leakage rate: <0.05Vol%/h
[Electronic Control System]
(1) Power supply: 220V/60Hz, 10A, a set of AC110V power sockets inside the glove box
(2) System control: PLC programmable controller with 5.7  Chinese and English touch man-machine interface to control and display water oxygen concentration and glove box pressure value
(3) The glove box pressure can be set freely, the automatic constant pressure (0-16 mbar) control and the foot pressure/decompression switch control the glove box pressure
[Gas purification / regeneration system and gas pipeline]
(1) Purification system: gas closed loop circulation water removal and deaeration system
(2) The concentration of the glove box gas after purification by the purification system: H2O<1ppm(v), O2<1ppm(v)
(3) Purifier (including catalyst): made of stainless steel SUS 304, with heater and heat preservation, can be reused
[Gas through system]
Micro-dust over-tank system in glove box: Round HEPA FILTER (0.3μm) circulates inside the glove box
[SOLVENT TRAP]
Organic Adsorber: Activated Carbon Adsorbent 10KG, Manual Switching Valve with Line KF-40 Three Manual Valves and Vacuum and Pressure Balance Valves
[Vacuum pump]
Vacuum pump: 12m3/h displacement, section oil rotary vacuum pump, vacuum <3 x 10-3 mbar, vacuum pump stops after running
There is a backstop function (EDWARDS RV-12)
[Feedthroughs hole]
Glove box back side Feedthroughs Holes: 5, KF- 40
[passing box]
(1) Large transfer box: stainless steel SUS304, thickness 2mm cylindrical transfer box diameter = 390mm, length = 600mm
 Internal polishing treatment, external powder baking finish, hard aluminum handle, 10mm thick, internal attachment slide
 1 oil-filled vacuum gauge, vacuum valve: 1 KF-25 pneumatic valve, pressure balance valve 3/8" solenoid valve 1
 Large transfer box control: internal and external doors for manual operation, vacuum/pressure balance for PLC automatic control
(2) Small transfer box: stainless steel SUS 304, thickness 2mm, cylindrical transfer box Diameter = 150mm, length = 300mm
1 oil-filled vacuum gauge, 3/8" vacuum/pressure balance for manual control
(3) Transmission box leakage rate: <10-5 mbar-l/s
[Water Oxygen Detector]
(1) Trace moisture analyzer: 0-1000 PPM (V)
(2) Micro-oxygen analyzer: 0-1000 PPM (V)
[Glove box automatic PURGING system]
(9) Glove box PURGING system, can set the water and oxygen concentration value freely, the concentration detection automatic start PURGING glove box
(2) After the glove box breaks into the atmosphere, the Purge system must be started within 60 minutes, and the automatic fast Purge should be reduced to below 100 ppm. [Water Oxygen Detector]
 


구매자 키워드:
Vacuum Oven, Vacuum Pump, Chemical Pump, Self Priming Pumps, Glove Box, Centrifugal Pump, Roots Blower, VMECA Vacuum Conveyor, VMECA Vacuum Conveyor, Double-Sided Glove Box
ttnet.net에 관련 종류 수색: